SAAB WIS ONLINE

PSG16 / U0002 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)

  U0002 00


PSG16 was Missing on Bus

Fault symptom

Fault indicator lamp (for further information see WIS Fault diagnosis, general)

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

P-bus short circuit for more than 0.l s.

OK report:

Fault criteria NOT fulfilled.

Checking the wiring harness

Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force.
Jiggle the wiring harness at several points to detect intermittent breaks or short circuits. Check also the connector for oxidation or loose pins.

Diagnostic help

In order to read DTC from PSG16, communication with CIM is required. If the DTC is stored and read with the diagnostic instrument, it indicates intermittent bus lead fault.