T8 / P0606 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Limp home
Control module - ECU fault
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Limp home
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Control module on-board diagnostics has detected an internal communication fault. |
Dependent:
System reaction to a fault:
| Different types depending on the type of ECM fault. |
OK report:
| Fault criterion not fulfilled and vehicle speed over 0 km/h for more than 60 s. |
Fault handling:
| (See section Fault handling III, "Other emission-related components and functions" for more information.) |
Diagnostic help
Diagnosis regards:
| To locate electrical faults in the control module internal electronics. |
| ____________________________________ |
| • | A fault on the ground lead to the intake manifold pressure sensor can generate the DTC. |
| ____________________________________ |
| See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
