SAAB WIS ONLINE

Oil suction pipe, removing and fitting

Oil suction pipe, removing and fitting

To remove



1. Remove the oil pan - see Oil pan, removing and fitting .

2. Remove the oil intake pipe (1) from the oil pump and the engine block.


To fit


1. Fit the oil intake pipe together with a new sealing ring on the oil pump - tightening torque 8 Nm

Note

Recut the threads before reuse and apply locking compound (red) when fitting the bolts. Mounting time including checking torque must not exceed 10 min.


2. Fit the oil intake pipe onto the engine block - tightening torque 8 Nm.

3. Fit the oil pan - see Oil pan, removing and fitting .