Rear tooth belt cover, removing and fitting
Rear tooth belt cover, removing and fitting |
Before removing the tooth belt: Turn the crankshaft to 60° (dim I) before the TDC mark.
To remove |
1. |
Remove the top of the tooth belt cover - see
Tooth belt cover top part, removing and fitting
.
|
2. |
Remove the multi-belt - see
Multi-belt, removing and fitting
.
|
3. |
Remove the multi-belt tensioning pulley - see
Tensioning device for multi-belt, removing and fitting
.
|
4. |
Remove the bottom of the tooth belt cover - see
Tooth belt cover bottom part, removing and fitting
.
|
5. |
Remove the tooth belt - see
Tooth belt, removing and fitting
.
|
6. |
Remove the drive belt tensioning pulley - see procedure
Tensioning device for multi-belt, removing and fitting
.
|
7. |
Remove the drive belt idler pulley - see procedure
Tooth belt guide pulleys, removing and fitting
.
|
8. |
Remove the camshaft sprocket - see procedure
Camshaft sprocket, removing and fitting
.
|
9. |
Remove the engine pad mounting iron (2) from the engine block.
|
10. |
Pull the drive belt pulley (3) from the crankshaft.
|
11. |
Remove the bolts (1) and (4) - remove the rear drive belt cover upwards.
|
To fit |
1. |
Fit the rear drive belt cover onto the cylinder head and oil pump - tightening torque 6 Nm.
|
2. |
Push the tooth belt sprocket onto the crankshaft.
|
3. |
Fit the engine pad fastening iron onto the engine block - tightening torque 65 Nm + 45° + 15°
Use new retaining bolts.
|
4. |
Fit the camshaft sprockets - see
Camshaft sprocket, removing and fitting
.
|
5. |
Fit the tooth belt guide rollers - see
Tooth belt guide rollers, removing and fitting
|
6. |
Fit the drive belt tensioning pulley - see
Tooth belt tensioning pulley, removing and fitting
.
|
7. |
Fit the tooth belt - see
Tooth belt, removing and fitting
.
|
8. |
Fit the bottom of the tooth belt cover - see
Tooth belt cover bottom part, removing and fitting
.
|
9. |
Fit the tensioning device for the multi-belt - see
Tensioning device for multi-belt, removing and fitting
.
|
10. |
Fit the multi-belts - see
Multi-belt, removing and fitting
.
|
11. |
Fit the top of the tooth belt cover - see
Tooth belt cover top part, removing and fitting
.
|