Camshaft position sensor, removing and fitting
Camshaft position sensor, removing and fitting |
To remove |
1. |
Remove the engine protection cover.
|
2. |
Remove the top of the tooth belt cover - see
Tooth belt cover top part, removing and fitting
.
|
3. |
Take off the cable set connector for the camshaft position sensor (1) - expose the cable. Remove the camshaft position sensor (2) from the cylinder head.
|
To fit |
1. |
Fit the camshaft sensor to the cylinder head - fit the bolts with locking compound (red) - tightening torque 8 Nm.
|
2. |
Put together the camshaft position sensor cable set connector - note the cable routing.
|
3. |
Fit the top of the tooth belt cover - see
Tooth belt cover top part, removing and fitting
.
|
4. |
Fit the engine cover.
|