Solenoid valve switch throttle, removing and fitting

/ 9-3 (9440) / 2005 / 2. Engine / 1.8 XE petrol / Simtec engine management system / Adjustment/replacement / Solenoid valve switch throttle, removing and fitting

To remove

1.	Pull of the cable set connector (1) and the vacuum hoses (2) from the switch throttle solenoid valve.

2.	Remove the switch throttle solenoid valve from the intake manifold.

To fit

1.	Fit the switch throttle solenoid valve to the intake manifold.

2.	Fit the cable set connector and the vacuum hoses to the switch throttle solenoid valve.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.