Camshaft position sensor (555), Z19DT
Camshaft position sensor (555), Z19DT |
To remove |
1. |
Remove the timing belt
.
|
2. |
Remove the camshaft sprocket using
32 025 019 Holding tool, camshaft sprocket
and
83 95 360 Holding tool, crankshaft pulley
.
|
3. |
Remove the camshaft position sensor connector behind the high pressure pump.
|
4. |
Remove the camshaft position sensor.
|
To fit |
1. |
Fit the camshaft position sensor. Use
74 96 268 Thread locking adhesive
|
2. |
Plug in the camshaft position sensor connector.
|
3. |
Fit the camshaft sprocket using
32 025 019 Holding tool, camshaft sprocket
and
83 95 360 Holding tool, crankshaft pulley
.
Tightening torque 120 Nm (89 lbf ft).
|
4. |
Fit the timing belt
.
|