SAAB WIS ONLINE

Particle trap pressure sensor (744)

Particle trap pressure sensor (744)

To remove


1. Remove the engine cover.

2. Remove the pressure sensor connector.


3. Remove the delivery hoses.

4. Remove the pressure switch by undoing the screw.


To fit


1. Fit the pressure switch with the screw.


2. Fit the delivery hoses.

3. Fit the pressure sensor connector.

4. Fit the engine cover.

5. If a new pressure sensor is fitted : Connect the diagnostic tool to reset adaptation values. Select Menu - Engine - Engine management system - Adjustment - Particle Filt. Pressure Sens. Repl.