Rear exhaust temperature sensor (602R)

/ 9-3 (9440) / 2005 / 2. Engine / 4-cylinder diesel / Exhaust emission control system / Adjustment/replacement / Rear exhaust temperature sensor (602R)

To remove

1.	Remove the temperature sensor connector and lower down the cable.

2.	Raise the car.

3.	Detach the cable from its fixings.

4.	Undo and remove the temperature sensor.

To fit

1.	Lubricate the threads sparingly with 30 20 971 Screw-thread paste and fit the temperature sensor. Tightening torque 45 Nm (33 lbf ft).

2.	Lift up and secure the cable.

3.	Lower the car.

4.	Plug in the temperature sensor connector and secure it.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.