SAAB WIS ONLINE

Solenoid valve, EGR (606), Z19DTH

Solenoid valve, EGR (606), Z19DTH

To remove


1. Remove the engine cover.


2. Remove the two bolts holding the EGR pipe.


3. Remove the solenoid valve unit connector.

4. Remove the engine cover mounting.

5. Remove the four bolts on the solenoid valve unit. Lift away the unit.


To fit


1. Clean the sealing surfaces and use a new gasket.

2. Fit the solenoid valve unit.

Tightening torque 25 Nm (18 lbf ft).


3. Fit the engine cover mounting.

4. Fit the solenoid valve unit connector.

5. Clean the EGR pipe sealing surfaces, use a new gasket. Fit the EGR pipe.

6. Fit the engine cover.