Test readings, entertainment head unit (353)
|
Test readings, entertainment head unit (353)
|
The following pages contain readings and instructions for measuring signals and levels on the head unit and its control module.
•
|
Note the test conditions and use common sense when assessing test results.
|
•
|
First check that the control module has a power supply and is grounded.
|
•
|
Then check all sensor inputs and signals from other systems.
|
•
|
Lastly, check the control module outputs. Remember, the readings do not say anything about whether or not the actuator is in working order.
|
•
|
If any reading is not OK, consult the wiring diagram to trace the leads, connectors or components which should be checked more thoroughly.
|
•
|
The specified test readings refer to those obtained with a calibrated Fluke 88/97.
|
•
|
Test readings %(+) and ms(+) show the signal's pulse ratio and pulse width. A test instrument with pulse ratio and pulse width measurement must be used. The sign (+) indicates a positive trigger pulse, TRIG+.
|
Control module connections
|
K8A
Pin
|
Component/Function
|
In/Out
|
Test conditions
|
Across
|
Test reading
|
1
|
Speaker, left front (-)
|
|
Signal unreadable
|
|
|
2
|
Speaker, left front (+)
|
|
Signal unreadable
|
|
|
3
|
Speaker, left rear (-)
|
|
Signal unreadable
|
|
|
4
|
Speaker, left rear (+)
|
|
Signal unreadable
|
|
|
5
|
Speaker, right front (-)
|
|
Signal unreadable
|
|
|
6
|
Speaker, right front (+)
|
|
Signal unreadable
|
|
|
7
|
Speaker, right rear (-)
|
|
Signal unreadable
|
|
|
8
|
Speaker, right rear (+)
|
|
Signal unreadable
|
|
|
K8B
Pin
|
Component/Function
|
In/Out
|
Test conditions
|
Across
|
Test reading
|
9
|
Tele (-)
|
|
|
|
|
10
|
Tele (+)
|
|
|
|
|
11
|
Tele Mute
|
|
|
|
|
12
|
Ground
|
Out
|
|
12-16
|
B+
|
13
|
Antenna Trig
|
In
|
Ignition ON
|
13-12
|
B+
|
14
|
No connection
|
|
|
|
|
15
|
No connection
|
|
|
|
|
16
|
+30
|
In
|
|
16-12
|
B+
|
O-bus
Pin
|
Component/Function
|
In/Out
|
Test conditions
|
Across
|
Test reading
|
1
|
Optic RX
|
|
Signal unreadable
|
|
|
2
|
Optic TX
|
|
Signal unreadable
|
|
|
K12
Pin
|
Component/Function
|
In/Out
|
Test conditions
|
Across
|
Test reading
|
1
|
No connection
|
|
|
|
|
2
|
No connection
|
|
|
|
|
3
|
No connection
|
|
|
|
|
4
|
AUX right (+)
|
In
|
|
|
|
5
|
AUX left (+)
|
In
|
|
|
|
6
|
No connection
|
|
|
|
|
7
|
No connection
|
|
|
|
|
8
|
No connection
|
|
|
|
|
9
|
No connection
|
|
|
|
|
10
|
AUX ground
|
Out
|
|
|
|
11
|
No connection
|
|
|
|
|
12
|
No connection
|
|
|
|
|