Battery

/ 9-3 (9440) / 2005 / 3. Electrical System / Charging systems / Adjustment/replacement / Battery

To remove

1.	Remove the battery cover and disconnect the negative battery cable.

2.	Disconnect the positive cable of the battery.

3.	Detach the battery drain hose.

4.	Undo the screw in the battery lock lug and lift out the battery.

To fit

1.	Put the battery in place. Slide it back until the rear edge latches in place.

2.	Fit the screw. Important Check that the battery is properly secured.

3.	Connect the positive cable of the battery.

4.	Connect the negative cable of the battery.

5.	Attach the battery drain hose.

6.	Fit the battery cover.

7.	Reset the car; see Procedure after battery disconnection .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.