Charge regulator, 4-cyl diesel
|
Charge regulator, 4-cyl diesel
|
In the method described below, the generator has already been removed.
1.
|
Remove the protective housing from the generator.
|
2.
|
Remove the voltage regulator.
|
The generator brushes are fixed to the voltage regulator. The whole unit must be replaced with a new one.
1.
|
Carefully straighten the spring tab so that it lies against the voltage regulator. Clean and apply a thin coating of Vaseline to avoid oxidation.
|
2.
|
Clean the ground connection on the regulator and apply Vaseline.
|
3.
|
Refit the voltage regulator.
|
4.
|
Refit the protective housing on to the generator.
|
5.
|
When changing, check battery, see
Battery check
and charge battery if necessary, see "Charging the battery".
|