Temperature sensor, outdoor air

/ 9-3 (9440) / 2005 / 3. Electrical System / Driver information, main instrument unit and SID / Adjustment/replacement / Temperature sensor, outdoor air

To remove

1.	Press in the lugs and detach the sensor from the bumper shell.

2.	Pull the sensor out of the bumper shell and unplug the connector.

To fit

1.	Plug in the connector.

2.	Press the sensor into the bumper shell.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.