Light setting, headlamps
Light setting, headlamps |
1. |
Check that all tyres have the correct air pressure.
|
2. |
Check that there is no load in the car.
|
3. |
Check fuel quantity. Compensate with load in the luggage compartment:
half tank - 25 kg; empty tank - 50 kg |
4. |
One person or a 75 kg load should be in the driver's seat.
|
5. |
The car should be free from snow and ice.
|
6. |
Park the car on a flat surface.
|
7. |
Stabilise the suspension by rocking the car.
|
8. |
Check the mounting of the bulb in the headlamp.
|
9. |
Switch on the ignition.
|
Important | ||
If the car is equipped with manual headlamp levelling, this must be set to the 0 position prior the checking and adjustment. |
||
1. |
Xenon headlamp:
Start the engine, allow the headlamps to do a reference shine and then switch off the engine.
|
2. |
Switch on dipped beam.
|
3. |
For handling of light setting equipment, see the user's manual from the manufacturer.
|
4. |
Adjust the light image vertically.
|
5. |
Check the lateral light image and adjust as necessary.
|