(351-2513) Water leakage in boot lid light cluster
Symptom: Water leakage in boot lid light cluster.
| TECHNICAL SERVICE BULLETIN | |
| Bulletin Nbr: | 351-2513 |
| Date: ........... | December 2004 |
| Market: | all |
| Water leakage in boot lid light cluster |
| Cars affected |
Saab 9-3 (9440) CV M04 - M05 up to and including Vehicle Identification Number 56001652
| Background |
In certain cars the seal for the boot lid light cluster is fitted in the wrong position. This means that water can penetrate into the lamp housing.
In the case of customer complaint, the following procedure must be carried out.
Symptom description
Water leakage in boot lid light cluster.| Parts required |
16 - 32 025 043 (CA: 10953479) Rubber moulding adhesive (sufficient for 25 light clusters)
| Procedure |
| 1. |
Remove the light cluster, see WIS 3. Electrical System - Lighting and signalling systems - Exterior lighting - Adjustment/Replacement - Rear lamp, boot lid, CV.
|
|
| 2. |
Remove the seal from the lamp housing.
|
|
| 3. |
Drain the water from the lamp housing and wipe clean the edge of the lamp housing.
|
|
| 4. |
Apply the adhesive to the edge of the lamp housing and bond the seal to the rear of the lamp housing. Check that the seal is correctly fitted.
|
|
| 5. |
Fit the light cluster, see WIS 3. Electrical System - Lighting and signalling systems - Exterior lighting - Adjustment/Replacement - Rear lamp, boot lid, CV.
|
|
| Warranty/Time Information |
In the case of customer complaint and if the car is within the warranty period , use the following information to fill out the claim:
Failed Object: 35143
Fault/Reason code: 56
Location code: 3/4; 09 (US=9)
Warranty Type (US): 01
Repair/Action code: 05
Labour Operation (US): 3514301
Labour Operation (CA): N1286
Time: 0.3 hr
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
