ICM display too light

/ 9-3 (9440) / 2005 / 3. Electrical System / Telematics and Navigation / Fault diagnosis, fault symptoms / ICM display too light

Fault symptom

ICM display too light

Conditions

No customer complaint regarding SID.

No DTCs stored with the fault symptom in question.

Diagnostic help

When the I-bus goes into "sleep mode", the display brightness increases. This is not a fault but totally normal.

See Reading:

ICM Light Sensor Value

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.