(383-2571) Modified anti-theft alarm configuration
Symptom: If the incorrect parameters are selected, the message "ALARM FAILURE, CONTACT WORKSHOP" in SID.
The following DTCs could occur in BCM: B3095, B3812 and B3938.
|
TECHNICAL SERVICE BULLETIN
|
|
Bulletin Nbr:
|
383-2571
|
|
Date:
...........
|
Juli 2005
|
|
Market:
|
US/CA
|
|
|
Modified anti-theft alarm configuration
|
This bulletin describes how "Add BCM" is to be carried out in order to prevent faults from arising in the anti-theft alarm system.
Saab 9-3 (9440) M04- with anti-theft alarm
The lock of the fuel filler flap has been eliminated as of M04. During the course of M04, the ultrasound sensor that was previously part of the anti-theft alarm system was also eliminated.
Once "Add BCM" has been carried out, it is important to select the correct parameters for the anti-theft alarm's configuration in order to prevent faults in the anti-theft alarm system.
Symptom description
If the incorrect parameters are selected, the message "ALARM FAILURE, CONTACT WORKSHOP" in SID.
The following DTCs could occur in BCM: B3095, B3812 and B3938.
|
Note
|
|
The fault symptom first arises when the anti-theft alarm has been armed by locking with the remote control.
|
The following selections for anti-theft protection should be selected in Tech2 when "Add BCM" is carried out:
M04-
|
Parameter
|
Select Option
|
|
Fuel filler flap:
|
Non-lockable fuel filler flap
|
M04 up to VIN 41037151 (4D), 46013575 (CV)
|
Parameter
|
Select Option
|
|
Anti-theft alarm:
|
With
|
|
Ultrasound sensor:
|
With
|
|
Tilt sensor:
|
Without
|
|
Alarm, acoustic indicator:
|
With horn sound
|
From VIN 41037152 (4D), 46013576 (CV)
|
Parameter
|
Select Option
|
|
Anti-theft alarm:
|
With
|
|
Ultrasound sensor:
|
Without
|
|
Tilt sensor:
|
Without
|
|
Alarm, acoustic indicator:
|
With horn sound
|
|
Warranty/Time Information
|
