Horn switch (41)
| Horn switch (41) |
| Location |
Horn switch (41)
| Main task |
Used to control the horn. CIM sends the switch status on the bus.
| Type |
Single pin switch integrated in the driver's airbag. The switch is connected to the Sentronic circuit on automatic cars.
| Connection |
The steering wheel buttons are resistive multiplexing and are divided into 2 circuits: Sentronic/horn in one circuit and the other buttons in the other. All buttons are jointly grounded from CIM. The lead for Sentronic/horn is supplied 5V via a CIM-integrated resistor of 560 Ω. When the horn switch is closed, the lead is grounded and voltage sinks to 0 V. The 2 leads go via coil springs to CIM. CIM transmits the switch status on the bus.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
