Gear lever housing
Gear lever housing |
To remove |
1. |
Remove the
Floor console
.
|
2. |
Remove the air duct.
|
3. |
Secure the gear lever in adjustment position by lifting the adjusting sleeve while pressing in the two catches. Use a pair of pliers. Let the catch engage in the adjusting position (position 4).
|
5. |
Detach the gear cable sheath from the gear lever housing.
|
6. |
Remove the gear lever housing.
|
To fit |
2. |
Check that the gear lever is in its adjusting position as for removal.
|
3. |
Check also that 4th gear is engaged in the gearbox.
|
4. |
Press on the gear adjusters with a screwdriver.
|
5. |
Lift up the adjusting device and fasten the catches to the gear lever.
|
6. |
Check the shifting positions.
|
7. |
Fit the air duct.
|
8. |
Fit the
Floor console
.
|