Vacuum pump, Z19
| Vacuum pump, Z19 |
| To remove |
| 1. |
Remove the upper engine cover.
|
|
| 2. |
Disconnect the hoses.
|
|
| 3. |
Remove the vacuum pump.
|
|
| To fit |
| 1. |
Clean the sealing surfaces and fit the vacuum pump using new seals.
Tightening torque: 9 Nm (7 lbf ft) 
|
|
| 2. |
Fit the hoses.
|
|
| 3. |
Fit the upper engine cover.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
