Headlight frame
Headlight frame |
To remove |
To remove the headlight frame, it is not necessary to remove the bumper member with integrated collision box.
1. |
Drill out the two upper spot welds.
|
2. |
Remove the 2 upper bolts.
|
3. |
Drill out the spot welds on the wheel housing and side member.
|
4. |
Tap out the headlight frame and pull it up from the collision box.
|
To fit |
Straighten the surfaces against which the replacement panel is to be fitted. Apply welding primer to the areas to be welded and anti-corrosion agent to the drilled holes.
1. |
Fit the headlight frame between the collision box and member. Position the frame against the wheel housing and collision box.
|
2. |
Plug weld or spot weld the frame as illustrated. It is not necessary to re-weld the frame to the collision box (for production only).
|
3. |
Grind the welds.
|
4. |
Fit the bolts.
|
5. |
Wash away surplus welding primer. Welding primer reduces the adhesion of paint, filler and sealant.
|
6. |
Apply primer to all bare metal surfaces.
|
7. |
Apply rust protector after painting. Use Terotex HV 400.
|