Headlining, 4D
Headlining, 4D |
To remove |
Note | ||
Pay attention to cleanliness so that the headlining does not become dirty. |
1. |
Remove
the sun visor
.
|
2. |
Remove
the parcel shelf trim
.
|
3. |
Remove
the A-pillar trim
.
|
4. |
Remove
the B-pillar trim
.
|
5. |
Remove
The C-pillar trim
.
|
6. |
Release the clips attaching the REC (Rear Electrical Centre) wiring harness.
|
7. |
Where appropriate.
Remove the LH speaker from the parcel shelf. |
8. |
Disconnect the inner roof connector from the REC and thread the wiring harness up through the parcel shelf.
|
9. |
Remove the roof light by carefully pulling down on the rear edge of the rear section of the light cover.
|
10. |
Pull carefully downwards on the rear edge of the forward section of the roof light cover.
|
11. |
Detach the rear-view mirror and unplug its connector.
|
12. |
Remove the rain sensor cover.
|
13. |
Remove the cover from the elevated brake light by carefully pulling the cover downwards and backwards. Remove plug from the rear edge of the headlining.
|
14. |
Certain cars
: Remove the
courtesy handles
.
|
15. |
Cars with sunroof:
Remove the decor strip's catch by pulling it forward. Then remove the decor strip. |
16. |
Release the headlining clips by first carefully releasing the clip locks and then pulling downwards around the edges of the headlining. Take down the headlining.
|
To fit |
1. |
Attach the headlining by carefully pushing the outer edges upwards so that the clips engage. Adjust the weather strips so that they are correctly positioned.
|
2. |
Certain cars
: Fit the
courtesy handles
.
|
4. |
Fit the upper brake light cover and press home the headliner clips.
|
5. |
Fit the rain sensor cover.
|
6. |
Plug in the rear-view mirror connector and fit the mirror.
|
7. |
Fit the forward section of the roof light cover.
|
8. |
Fit the rear section of the roof light cover.
|
9. |
Thread the headlining wiring harness through the parcel shelf and connect it to the REC.
|
10. |
Where appropriate.
Fit the left-hand speaker into the parcel shelf. |
11. |
Position the wiring harness to the REC and secure the clips.
|
12. |
Fit
the C-pillar trim
.
|
13. |
Fit the
B-pillar trim
.
|
14. |
Fit
The A-pillar trim
.
|
15. |
Fit the
parcel shelf trim
.
|
16. |
Fit
the sun visor
.
|