Upholstery, rear backrest, 4D
Upholstery, rear backrest, 4D |
Removing |
1. |
Remove the 60% part of the backrest
from the rear seat.
|
2. |
Remove the head restraint supports
.
|
3. |
Remove the armrest
from the backrest 60% part.
|
4. |
Remove the backrest belt guide.
|
5. |
Remove the sprung backrest catch.
|
6. |
Remove the through-load hatch frame.
|
7. |
Remove the upholstery strips from the backrest.
|
8. |
Remove the through-load hatch by undoing the locating pins at the lower edge of the backrest.
|
9. |
Carefully pull the upholstery off the foam backrest cushion.
|
Fitting |
1. |
Fit the upholstery to the foam backrest cushion.
|
2. |
Fit the through-load hatch.
|
3. |
Fit the backrest upholstery strips. Make sure the upholstery is properly stretched.
|
4. |
Fit the through-load hatch frame.
|
5. |
Fit the sprung backrest catch.
|
6. |
Fit the seatbelt guide to the backrest.
|
7. |
Fit the armrest
to the backrest 60% part.
|
8. |
Fit the head restraint supports
and head restraint. Ensure that head restraint support catches engage properly.
|
9. |
Fit the backrest 60% part
to the rear seat.
|