(852-2553) PSM missing according to diagnostic trouble code reading
Symptom: The following error message is shown during diagnostic trouble code reading: "PSM missing".
TECHNICAL SERVICE BULLETIN | |
Bulletin Nbr: | 852-2553 |
Date: ........... | AprilĀ 2005 |
Market: | all |
PSM missing according to diagnostic trouble code reading |
Cars affected |
9-3 (9440) 4D M05 within VIN range 51038274 - 51047364 equipped with electrically adjustable seats
Background |
The following message may be displayed when reading diagnostic trouble codes with the diagnostic tool: "PSM missing". This is due to incorrect parameter setting in production.
The PSM is an ECU that is only fitted in earlier versions of the 9-3 CV and has never been fitted in the 4D. Incorrect parameter setting means that the system has been advised in terms of data that the PSM should be present, which means that the diagnostic tool searches for the PSM when reading diagnostic trouble codes, however with the correct result "PSM missing" as the PSM is not physically present.
Note | ||
The customer does not notice that anything is wrong in the car due to the incorrect parameter setting. |
In the event of the above error message the following procedure must be carried out.
Symptom description
The following error message is shown during diagnostic trouble code reading: "PSM missing".Parts required |
Not affected
Procedure |
When the message "PSM missing" is shown, proceed as follows:
1. |
Select "Saab 9-3 Sport (9440)"
|
2. |
Select "All"
|
3. |
Select "Add/Remove"
|
4. |
Select "Control module"
|
5. |
Select "PSM"
|
6. |
Select "Remove"
|
Warranty/Time Information |
If the car is within the warranty period , use the following information to fill out the claim:
Failed Object: 36102
Fault/Reason code: 01
Location code: 09 (US=9)
Warranty Type (US): 01
Repair/Action code: 05
Labour Operation (US): 3610205
Labour Operation (CA): N5872
Time: 0.2 h (calculated based on the diagnostic tool already being connected)