Motor, length adjustment, access, electrically operated seat (357n)
| Motor, length adjustment, access, electrically operated seat (357n) |
| Main task |
To move the seat lengthways when the backrest is folded up/down.
| Type |
The DC motor which drives a screw in respective right and left seat rails, the screw is fixed on the seat chassis and the nut is fixed on the floor rail for respective sides.
| Connect |
The motor is connected to the seat control module (357Dk/357k) pins 60 and 63. Information on required lengthways adjustment of the seat comes from the microswitch (369r) to the control module. This uses information from the microswitch to power and ground the motor. The polarity of the outputs is reversed to change the direction of rotation of the motor.
Diagram of seat with memory function
Diagram of seat without memory function
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
