Motor, length adjustment, electrically operated seat (357a), 4D
| Motor, length adjustment, electrically operated seat (357a), 4D |
| Main task |
To adjust the legroom.
| Type |
The DC motor which drives a screw in respective right and left seat rails, the screw is fixed on the seat chassis and the nut is fixed on the floor rail for respective sides.
| Connect |
The motor is connected to the switch unit pins 1 and 8, depending on the switch's position, the motor is voltage fed and ground via the switch unit. The polarity of the outputs are reversed to change the motor's direction of rotation.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
