Rear torque arm, Z18

/ 9-3 (9440) / 2006 / 2. Engine / 1.8 XE petrol / Basic engine / Adjustment/replacement / Rear torque arm, Z18

To remove

1.	Raise the car.

2.	Remove the rear torque arm holder.

3.	Remove the rear torque arm.

To fit

1.	Fit the rear torque arm. Tightening torque 60 Nm (44 lbf ft)

2.	Fit the rear torque arm holder. Tightening torque 80 Nm (59 lbf ft).

3.	Lower the car.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.