SAAB WIS ONLINE

Fan motor, removing and fitting

Fan motor, removing and fitting



1. Open the bonnet

2. Remove the battery cover and the battery coolant pipe.

3. Pull off the cooling module cable set connector (1)

Remove the cable set


4. Raise the car


5. Remove the spoiler shield.

6. Lower the car

7. Remove the fan housing

Important: carefully remove the fan housing upwards

2x Undo the bolt (arrows)


8. Remove the fan motor

3x Unscrew (1)


9. Fit the fan motor

Instruction: check that the clamp (2) is fitted correctly

3x Tighten bolt - Tightening torque 5 Nm


10. Fit the fan housing

Important: carefully fit fan housing from above

2x Tighten bolt


11. Raise the car


12. Fit the spoiler shield

13. Lower the car

14. Fit the cooling module cable set connector

Fit the cable set

15. Fit the battery cover and the battery cooler pipe.

16. Close the bonnet