(TA234-0824) Fuel shut off during filling of the fuel tank
 
 
 
  
   
    
     | 
      TECHNICAL ADVICE - Quick information for your help
      | 
    
    
     | 
      Bulletin Nbr:
      | 
     
      TA234-0824
      | 
    
    
     | 
      Date:
      
       ...........
      
      | 
     
      December 2008
      | 
    
    
     | 
      Market:
      | 
     
      All
      | 
    
   
  
  
  
   
    
     | 
      | 
     
      Fuel shut off during filling of the fuel tank
      | 
    
   
  
  
   
   
    
    
    
    
    
   
   
    
   
   
    Saab 9-3 SS, SC, CV with diesel engines from MY -03.
    
    
    
    
    
    
    
   
   
    
   
   
    In some cars, it is hard to fill the fuel tank due to restriction in
the fuel tank ventilation hose.
    
    
    
    
    
    
    
   
   
    
   
   
    Too early shut-off or spit back during fuel filling.
    
    
    
    
    
    
    
   
   
    
   
   
    Check and clean the fuel ventilation hose in the fuel tank as follows:
    
    
   
   
   
    
     
      
       | 
        1.
        | 
       
        Lower the fuel tank for access.
         
         
        | 
      
     
    
   
   
    
     
      
       | 
        2.
        | 
       
        Uncover the rubber protection (1) above the ventilation hose (2)
from ventilation blue cover and clean the inside of the pipe.
         
         
        
          
        
         
        | 
      
     
    
   
   
    
     
      
       | 
        3.
        | 
       
        Make a simple tool as shown below. Bend a steel wire 500 mm long
(20 inches) in the middle. Locate a piece of cloth (cotton) in the loop (proper
size to fit inside the hose). Twist the wires.
         
         
        
          
        
         
        | 
      
     
    
   
   
    
     
      
       | 
        4.
        | 
       
        Insert and move/turn the "tool" through the ventilation hose in
to the blue cover until the hose is clean. Use a dry cloth. Do
        
         NOT
        
        use any liquids, cleaning agents or solvents when cleaning the
tube.
         
         
        
          
        
         
        | 
      
     
    
   
   
    
     
      
       | 
        5.
        | 
       
        Locate the rubber cover to correct position above the ventilation
hose.
         
         
        | 
      
     
    
   
   
    
     
      
       | 
        6.
        | 
       
        Reassemble the fuel tank.
         
         
        |