Camshafts
Camshafts |
To remove |
1. |
Remove
Camshaft sprocket
.
|
2. |
Remove the power steering pump bolts (A) and shift the pump outward.
|
3. |
Remove the vacuum pump bolts (B) and shift the pump outward.
|
5. |
Note the bearing cap designations (A)
|
To fit |
1. |
Lubricate the contact surfaces with engine oil.
|
2. |
Apply a thin film of sealant on the sealing surfaces of the guide bearing.
|
3. |
Note the bearing cap designations (A).
|
4. |
Fit the camshaft bearing caps in the specified order.
Tightening torque 9 Nm (7 lbf ft). |
5. |
Fit the guide bearings.
Tightening torque 22 Nm (16 lbf ft) |
6. |
Fit the vacuum pump bolts (B).
Tightening torque 22 Nm (16 lbf ft) |
7. |
Fit the power steering pump bolts (A).
Tightening torque 22 Nm (16 lbf ft) |
8. |
Fit
Camshaft sprocket
.
|