Engine mounting, left-hand
|
Engine mounting, left-hand
|
1.
|
Place drapes over the wings to keep the paintwork clean and protect it from damage. Raise the car.
|
2.
|
CV:
Remove the cross brace. See Chassis reinforcement, front subframe, CV
|
5.
|
Remove the battery (A).
|
6.
|
Remove the battery tray (B)
|
7.
|
Remove the ground cable from the engine mounting.
|
8.
|
Remove the engine pad bolts (A) from the gearbox bracket.
|
9.
|
Remove the bolts (B) for the gearbox bracket. Lift out the bracket.
|
10.
|
Remove the engine pad bolts (C) from the body.
|
11.
|
Remove the engine pad (D).
|
1.
|
Fit the engine pad (A) in place. Tighten the bolts (B).
Tightening torque: 15 Nm + 45° (11 lbf ft + 45°)
|
2.
|
Fit the gearbox bracket (C).
Tightening torque 80 Nm (59 lbf ft).
|
3.
|
Fit the engine pad bolts (D) to the bracket.
Tightening torque 53 Nm (39 lbf ft)
|
4.
|
Fit the ground cable to the engine pad.
|
5.
|
Fit the battery tray and battery.
|
7.
|
CV:
Fit the cross brace. See Chassis reinforcement, front subframe, CV
|
8.
|
Lower the car and remove the wing protectors.
|