Actuator, throttle body (604), B207

/ 9-3 (9440) / 2006 / 2. Engine / 4-cylinder petrol / Engine management system Trionic T8 / Adjustment/replacement / Actuator, throttle body (604), B207

To remove

1.	Remove the upper engine cover.

2.	Detach the turbocharger delivery hose from the throttle body and bend it aside.

3.	Carefully bend up the bracket catch and remove the EVAP canister purge valve from the bracket.

4.	Remove the bracket from the throttle body and carefully bend it aside.

5.	Unplug the connector from the throttle body.

6.	Remove the throttle body.

7.	Remove the old seal and clean the sealing surfaces.

To fit

1.	Fit the throttle body with a new seal.

2.	Attach the connector.

3.	Fit the bracket.

4.	Fit the EVAP canister purge valve and bend the catch back in place.

5.	Fit the turbocharger delivery hose to the throttle body.

6.	Fit the upper engine cover.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.