Engine oil and filter

/ 9-3 (9440) / 2006 / 2. Engine / V6 petrol / Basic engine / Service / Engine oil and filter

Engine oil and filter

1.	Raise the car.

2.	Drain the engine oil.

3.	Fit the drain plug Tightening torque 25 Nm (19 lbf ft)

4.	Remove the filter cover and take out the filter element.

5.	Fit a new oil filter using a new O-ring.

6.	Lower the car.

7.	Top up oil to the MAX mark (6 l).

8.	Check the level when the engine is warm - 2-5 minutes after the engine was switched off.

9.	Check that the filter does not leak oil after starting the engine.

Oil type

See Recommend oil grade

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.