Bleeding and charging the cooling system
|
Bleeding and charging the cooling system
|
Warning
|
The cooling system is under pressure. Hot coolant and steam can escape.
|
- Open the cap slowly to release the pressure.
|
- Carelessness can cause eye and burn injuries
|
|
|
|
|
1.
|
Fill the system to the MAX mark using
40 - 400 131 397 Coolant
and close the expansion tank cap (coolant is blended - equal parts coolant and water).
|
2.
|
Connect an exhaust hose.
|
3.
|
Start the engine and let it run for a short while at varying speeds.
|
4.
|
Top up with coolant ant screw on the expansion tank cap.
|
5.
|
Run the engine at varying speeds until the thermostat opens (radiator fan has started).
|
6.
|
Turn off the engine and top up with coolant to MAX if necessary.
|