Crankshaft position sensor (345)
|
Crankshaft position sensor (345)
|
4.
|
Undo the cable fixing from the heat shield.
|
5.
|
Remove the heat shield.
|
6.
|
Unplug the crankshaft sensor connector.
|
1.
|
Fit the sensor using a new O-ring lightly coated with
acid-free vaseline
.
Tightening torque 10 Nm (7 lbf ft)
|
2.
|
Plug in the connector.
|
3.
|
Fit the heat shield.
|
4.
|
Secure the cable to the heat shield.
|
5.
|
Fit the bracket to the engine and front exhaust pipe.
Tightening torque to engine: 23 Nm (17 lbf ft)
Tightening torque to exhaust pipe: 40 Nm (30 lbf ft)
Tightening torque to heat shield:
M6 = 9 Nm (6 lbf ft)
M10 = 38 Nm (28 lbf ft)
|