SAAB WIS ONLINE

Front secondary air pipe

Front secondary air pipe

To remove


1. Remove Turbocharger, B284 .

2. Remove the bolts and nuts of the heat shield.


3. Lift away the heat shield.

4. Remove the rear bolts of the pipe.


5. Remove the front bolts of the pipe.

6. Lift away the pipe.


To fit


1. Fit the pipe using new gaskets.


2. Fit the front bolts of the pipe.

Tightening torque, bolts: 23 Nm (17 lbf ft)

3. Fit the rear bolts of the pipe.

4. Make sure that the spacer is in place. Fit the heat shield.


5. Fit the bolts and nuts of the heat shield.

Tightening torque, bolt 10 Nm (7 lbf ft)

Tightening torque, catalytic converter mounting, M10: 42 Nm (31 lbf ft)

6. Fit Turbocharger, B284 .