Heat shield between the engine and turbocharger

/ 9-3 (9440) / 2006 / 2. Engine / V6 petrol / Turbocharger system / Adjustment/replacement / Heat shield between the engine and turbocharger

To remove

1.	Remove Turbocharger, B284 .

2.	Detach the engine breather pipe.

3.	Detach the upper retaining bracket of the catalytic converter.

4.	Remove the bolts and nuts of the heat shield.

5.	Lift away the heat shield.

To fit

1.	Make sure that the spacer is in place. Fit the heat shield.

2.	Fit the bolts and nuts of the heat shield.

3.	Fit the upper retaining bracket of the catalytic converter. Tightening torque, M10: 42 Nm (31 lbf ft)

4.	Attach the engine breather pipe.

5.	Fit Turbocharger, B284 .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.