Main unit, radio (353)
Main unit, radio (353) |
Important | ||
The optic cables must be handled carefully so as not to distort the signal. |
||
• |
It is extremely important that the two leads in the connector are not mixed up.
|
|
• |
The cables cannot be spliced.
|
|
• |
The lead must not be bent to form a curve with a radius of less than 25 mm.
|
|
• |
The lead must not be subjected to temperatures greater than 185°F (85°C).
|
|
• |
The lead ends should be kept free from dirt.
|
|
• |
The lead must not be subjected to blows that could cause the transparent plastic to whiten, thereby reducing light intensity. This could cause disruptions in communication.
|
|
• |
The lead should not be stretched across a sharp edge, which would cause increased damping of the signal.
|
|
|
To remove |
Carry out actions before removing control module .
1. |
Remove the ACC/MCC unit with
82 93 474 Removal tool
.
|
2. |
Unplug the connector to the ACC/MCC unit.
|
3. |
Remove the EHU by pressing in the 2 catches.
|
4. |
Unplug the CD player from the EHU.
|
5. |
Remove the CD player using
84 71 203 Removal tool
.
|
To fit |
1. |
Fit the CD player.
|
2. |
Plug in the connectors to the CD player and the main entertainment unit.
|
3. |
Fit the EHU. You should hear a click.
|
4. |
Plug in the connector to the ACC/MCC unit.
|
5. |
Fit the ACC/MCC unit so that it locks into position.
|
6. |
Carry out
actions after replacement of control module
.
|
7. |
Check the function.
|