Side direction indicators

/ 9-3 (9440) / 2006 / 3. Electrical System / Lighting and signalling systems / Exterior lighting / Adjustment/replacement / Side direction indicators

Replacing

Important

When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged.

1.	Press the lamp housing forward slightly and release its back edge.

2.	Remove and change the bulb.

3.	Fit the back edge of the lamp housing first and then press in the front edge.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.