Starter motor, B284

/ 9-3 (9440) / 2006 / 3. Electrical System / Starting system / Adjustment/replacement / Starter motor, B284

To remove

1.	Remove the battery cover.

2.	Remove the negative battery cable.

3.	Raise the car.

4.	Remove the Secondary air pump .

5.	Detach the starter motor connecting cables.

6.	Remove the starter motor.

To fit

1.	Fit the starter motor. Tightening torque 47 Nm (35 lbf ft)

2.	Connect the cables to the starter motor.

3.	Fit the Secondary air pump .

4.	Lower the car.

5.	Fit the negative battery cable.

6.	Fit the battery cover.

7.	Reset the car; see Procedures after battery disconnection .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.