SAAB WIS ONLINE

"No OnStar" shown on the display

Read the instructions below then start the fault diagnostic procedure.

Symptom: "No OnStar" shown on the display

OnStar telephone out of order


Fault symptom

"No OnStar" shown on the display

Conditions

The car is within an area of coverage for the service.

The car's OnStar system is registered with OnStar.

No DTCs stored with the fault symptom in question.

The diagnostic tool is communicating with the control module.

Diagnostic help

To show "OnStar" on the display, the system must be registered and the car must be within the coverage area so that the service is functioning. "No OnStar" will normally be displayed when the car is outside the coverage area, when the signal is weak and when a telephone call has been disconnected. Refer to the owner's manual for more information.