(383-2618) Updating the software in the BCM
Symptom: The battery is discharged when the car is not used for several days.
MODIFICATION INSTRUCTION | |
Bulletin Nbr: | 383-2618 |
Date: ........... | MarsĀ 2006 |
Market: | enligt separat lista |
Updating the software in the BCM |
Service Campaign 157 20 |
Cars in stock must be rectified before delivery.
Cars already delivered must be rectified in connection with a scheduled visit to the garage for service or repairs.
Cars affected |
9-3 M06 4D/5D within Vehicle Identification Number range 61034483 - 61107004
9-3 M06 CV within Vehicle Identification Number range 66005822 - 66006795
Background |
Component replacement in the BCM can in certain cases result in increased standing current consumption from 1 mA to 100 mA.
Symptom description
The battery is discharged when the car is not used for several days.Parts required |
For fitting the modification identity plate (not US/CA):
12 785 148 Modification identity plate93 160 907 Cleaning agent Motip Dupli, aerosol 400 ml (sufficient for 50-100 cars)
Procedure |
Checking the modification identity plate (not US/CA)
Before proceeding, check box A4 of the modification identity plate. From and including M04 the car's Warranty and Service Book contains the "Table of Modifications". A modification identity plate must be fitted in accordance with the section "Fitting the modification identity plate" where local directives require the marking of the car. If the box is not marked, continue as follows.Updating the software
Update the BCM with new application software (#90490993) in order to reduce standing current consumption to 2 mA. The application software is available from and including "TIS2000 Edition 2005-4, Update 4".
Marking the modification identity plate (not US/CA) |
After carrying out the procedure, mark box A4 on the modification identity plate. From and including M04 the car's Warranty and Service Book contains the "Table of Modifications". Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8" if carried out by the dealer.
Fitting the modification identity plate (not US/CA) |
Note | ||
A modification identity plate must only be fitted where local directives require the marking of the car. |
Fit the modification identity plate in accordance with WIS
9-3 (9440) M06 - General - General - Technical data - Plates and labels
Warranty/Time Information |
See separate information.