SAAB WIS ONLINE

Control module, AHL (664)

Control module, AHL (664)

To remove

Carry out actions before removing control module .


1. Remove the battery cover lid.


2. Remove the filler pipe of the washer reservoir.

3. Remove the main fuse box cover.

4. Remove the nuts.


Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


5. Lift up the control module and detach the connector.



To fit

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



1. Plug in the connector.


2. Fit the control module.


3. Fit the main fuse box cover.


4. Fit the filler pipe of the washer reservoir.

5. Fit the battery cover lid.

6. Carry out actions after replacement of control module . The control module is calibrated when " Add" is carried out, see calibration of AHL control module .