SAAB WIS ONLINE

Main instrument unit (540)

Main instrument unit (540)

To remove

Carry out procedure before control module removal .


1. Remove the Air vent, panel, driver and Centre air vent, panel .

2. Remove the infotainment control panel (ICM).


Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Remove the SID unit control panel (SIDC) by pressing together the two tabs on the back and then pressing out the control panel from behind, starting at the top.


4. Remove the instrument plate.


Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


5. Remove the main instrument unit and remove the connectors for the main instrument unit.



To fit

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



1. Connect and fit the main instrument unit.


2. Fit the instrument plate.


Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Connect SIDC and fit it by positioning the hook in the bottom and then pressing in the top.


4. Fit the ICM unit.


5. Align and fit Centre air vent, panel and Air vent, panel, driver.


Carry out Procedure after control module replacement .