Checking the transmission fluid level
|
|
Checking the transmission fluid level
|
|
1.
|
Place the car on a lift as level as possible. Chock the wheels if a track lift is being used.
|
|
2.
|
Apply the handbrake, engage P and start the engine. Raise the car and check the fluid level. If necessary, top up with fluid to dipstick level "cold". Lower the car.
|
Important
|
|
In order to correctly read the oil level, the O-ring must be removed from the dipstick and refitted after reading.
|
|
|
|
|
3.
|
Connect Tech2. Run the engine until the temperature reaches 80°C in menu "Read values" TCM.
|
|
4.
|
Check the fluid level and top up as necessary. The difference between max and min marks is 0.3 litres.
|
|
1.
|
Place the car on a lift. Engage P and apply the handbrake. Chock the wheels if a track lift is being used.
|
|
2.
|
Remove the dipstick and lower the car.
|
|
4.
|
Fill with automatic transmission fluid as specified, wee
Weight, fluid capacity and grade of fluid
.
|
Important
|
|
Fill up with oil through the oil filler hole. Do not remove any other plugs from the top of the gearcase.
|
|
|
|
|
5.
|
Raise the car, remove the hoses and put back the dipstick. Lower the car.
|
