Input shaft speed sensor
Input shaft speed sensor |
To remove |
1. |
Place covers over the wings to keep the paintwork clean and protect it from damage.
|
2. |
Remove the battery cover.
|
3. |
Remove the battery, coolant pipe, main fuse box and bonnet switch.
|
4. |
Unplug the control module connector. Unplug the connectors under the control module. Remove the battery tray.
|
5. |
Unplug the speed sensor connector. Remove the input shaft speed sensor.
|
To fit |
1. |
Fit the speed sensor and plug in the connector.
|
2. |
Plug in the connectors under the control module. Plug in the control module connector and fit the battery tray.
|
3. |
Fit the bonnet switch, main fuse box and coolant pipe. Fit the battery.
|
4. |
Fit the battery cover.
|
5. |
Remove the wing covers.
|