Output shaft speed sensor
|
Output shaft speed sensor
|
1.
|
Place covers over the wings to keep the paintwork clean and protect it from damage.
|
2.
|
Remove the battery cover.
|
3.
|
Remove the battery, coolant pipe, main fuse box and bonnet switch.
|
4.
|
Unplug the control module connector. Unplug the connectors under the control module. Remove the battery tray.
|
5.
|
Unplug the speed sensor connector. Remove the output shaft speed sensor.
|
1.
|
Fit the speed sensor and plug in the connector.
|
2.
|
Plug in the connectors under the control module. Plug in the control module connector and fit the battery tray.
|
3.
|
Fit the bonnet switch, main fuse box and coolant pipe. Fit the battery.
|
4.
|
Fit the battery cover.
|
5.
|
Remove the wing covers.
|