Clutch assembly
Clutch assembly |
To remove |
1. |
Remove
Gearbox assembly B207
or
Gearbox assembly 6-speed
or
F17:
Gearbox, removing and fitting
or
Gearbox assembly B284
.
|
2. |
Secure the flywheel by fitting
83 94 868 Flywheel locking attachment
or
83 92 987 Flywheel locking attachment
for the Z19 in the threaded hole in the oil sump.
|
3. |
Remove the bolts holding the pressure plate and remove the clutch.
|
4. |
Check the contact surface of the driven plate in the flywheel.
|
5. |
Check the pressure plate for scratches and warping.
|
6. |
Check the release bearing for noise, wear and the like.
|
7. |
Check driven plate wear and change if necessary.
|
To fit |
2. |
Centre the driven plate
B207:
with
87 92 327 Centring mandrel, clutch plates
or
man 6-speed:
83 96 277 Centring mandrel, clutch plates, 6-speed gearbox
or
Z18XE:
87 92 947 Centring mandrel, clutch plates
and tighten the bolts alternately. Apply
74 96 268 Thread locking adhesive
on the threads.
Tightening torque 30 Nm (22 lbf ft) Tightening torque, Z18XE/F17 15 Nm (11 lbf ft) |
3. |
Remove the flywheel locking attachment.
|
4. |
Fit
Gearbox assembly B207
or
Gearbox assembly
6-speed or F17
Gearbox, removing and fitting
or
Gearbox assembly B284
. Lubricate the primary shaft splines as specified in
List of lubricants and sealants
.
|