Differential cover gasket, replacement
|
Differential cover gasket, replacement
|
If fitted: Remove the lower engine compartment shield.
1.
|
Position an oil tray to collect the gearbox oil which will run out. Remove the differential cover (10 fixing bolts). If necessary free the cover with light taps of a rubber hammer. Remove the cover gasket.
|
2.
|
Use grease to hold a new gasket in place on the differential housing cover.
|
3.
|
Fit the differential housing cover to the gearbox.
|
Tightening torques
|
Light alloy design:
|
18 Nm
|
Adjust the gearbox oil level. See service procedure
Gearbox oil level, checking and correcting F17
Where appropriate: Fit the lower engine compartment shield.